This manual range AC 1000 Amps clamp meter is one of a series handheld 3 1/2 digital clamp meter for measuring DC and AC Voltage, AC current, resistance, continuity test and insulation test. some models of this manual range AC 1000 Amps clamp meter also provide frequency or temperature test. Full overload protection, low battery indication and over-range indication are provided.
Display | 3½ digit LCD, with automatic polarity
indication |
Measuring Method | Dual-slope integration A-D converter
system. |
Overrange Indication | ”1” Figure only in the display. |
Max. Voltage Between Terminals And Earth Ground | CAT III 600V |
Operating Temperature | 5℃ to 35℃(21°F to 95°F) |
Storage Environment | -10℃ to 50℃(14°F to 122°F) |
Power | 9V alkaline or carbon-zinc battery
(NEDA 1604). |
Low Battery Indication | ‘BAT’ to left of display |
Optional Accessories | Thermocouple (K type) |
Dimension
Weight |
90(W)´230(D)´43(H) mm
320g (including battery) |
M266 | M266A | M266C | M266F | |
DC Voltage | 2V/20V/200V±0.5%, 1000V±0.8% | |||
AC Voltage | 200V±1.0%, 750V±1.2% | |||
AC Current | 200~600A±2.0%, 600~1000A±3.0% | |||
Resistance | 200Ω,20KΩ,2MΩ±1.0% | |||
Frequency | 2KHz±3% | |||
Temperature | 0~750℃±2% |
Features | ||||
Display Counts | 1999 | 1999 | 1999 | 1999 |
LCD Size | 15 X47 mm | 15 X47 mm | 15 X47 mm | 15 X47 mm |
Diode Test | √ | √ | ||
Continuity Buzzer | √ | √ | √ | |
Data Hold | √ | √ | √ | |
Peak Hold | √ | |||
Low Power Indication | √ | √ | √ | √ |
Battery | 9 V | 9 V | 9 V | 9 V |
Size | 90x230x43 mm | 90x230x43 mm | 90x230x43 mm | 90x230x43 mm |
Weight | 310 g | 310 g | 310 g | 310 g |
With Functions of Voltage measurement, Current measurement, Resistance measurement, Diode test,Continuity test, Temperature measurement, Frequency and insulation measurement, this digital multimeter is ideal for use in the fields, workshop, school, hobby and home applications.
Test Leads
Battery
Operating Manual
* Before opening the meter, always disconnect test leads from all sources of electric current.
* If any faults or abnormalities are observed, the meter can not be used any more and it has to be checked out.
* Never use the meter unless the back cover and the battery cover are in place and fastened fully.
* Do not use abrasives or solvents on the meter, use a damp cloth and mild detergent only.